SJ3P
Limited slip differential TL4 gearbox for Clio III RS
- Similar products
-
Save 30% off
SJ3P Short final drive for PEUGEOT 205 309 and 206 12x55 to bolt
€958.00€670.60In stockSave 42% offSJ3P Short final drive for CITROEN Saxo or PEUGEOT 106 13x59 with specific bolting 12 holes
€986.00€574.80In stockQUAIFE Renault Clio III R.S. QUAIFE LSD
€1,027.00In stockPartially available
Limited slip differential TL4 gearbox for Clio III RS
The limited slip differential is used to redistribute power to the wheels in case of adhesion loss.
It offsets this loss by sending more power to the wheels with the most adhesion on the road.
Remember to check the wear and tear of your limited slip differential and replace it if it is necessary.
To know if a limited slip differential is always efficient, you have to:
- Raise the car on only one side
- Measure with a torque wrench the key threshold by the hub nut. The lower it is, the less is efficient
- Measure with the second power wheel on the ground, so with adhesion.
The limited slip differential is used to redistribute power to the wheels in case of adhesion loss.
It offsets this loss by sending more power to the wheels with the most adhesion on the road.
Remember to check the wear and tear of your limited slip differential and replace it if it is necessary.
To know if a limited slip differential is always efficient, you have to:
- Raise the car on only one side
- Measure with a torque wrench the key threshold by the hub nut. The lower it is, the less is efficient
- Measure with the second power wheel on the ground, so with adhesion.
Ref.: 3QDTL4
See all the Gear boxes SJ3PSee all SJ3P productsUniverse | Competition |
---|---|
Oreca Reference | 3QDTL4 |
Manufacturer's reference | 3QDTL4 |
Brand | SJ3P |