REDSPEC wheel spacers 5 x 114.3 for HONDA

REDSPEC wheel spacers 5 x 114.3 for HONDA

REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.

Specifications:
PCD: 5 x 114.3.
Centre bore: 64.
Thread: M12 x 1.50.

Several models available:
- Without bolt: 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.

- With stud bolt: 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.

- With double bolts: 20 or 30 mm thick, bolts with pre-installed stud bolts and nuts.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
Note: If the thickness of the wheel spacers is less than the length of the original stud bolts, the correct contact between the wheel rims and the spacers cannot be guaranteed. Thus, the stud bolts should be shortened accordingly.

For HONDA :
Civic VI Aerodech type MB / MC from 04/1998 to 02/2001.
Civic VII Hatchback type EU/EP/EV from 01/2000 to 09/2005.
Civic VIII Hatchback type FN/FK from 09/2005 to 2012.
Civic IX type FB from 02/2012.
CR-Z type ZFI from 06/2010.
Prelude BB6/BB8 from 1997 to 2003.
Integra Coupé type DC2 from 07/1993 to 11/2001.
Integra Type R B632 from 02/2002.