REDSPEC wheel spacers 5 x 108 for FORD

REDSPEC wheel spacers 5 x 108 for FORD

REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.

Specifications:
PCD: 5 x 108.
Centre bore: 63.3.
Thread: M12 x 1.50.

Several models available:
- Without bolt: 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.

- With stud bolt: 16 or 20 mm thick.
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.

- With double bolts: 20 or 25 mm thick, bolts with pre-installed stud bolts and nuts.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.

For FORD:
Focus II type DA3 / DB3 from 2003 to 2010.
Focus III / RS type DA3-RS from 09/2008 to 02/2011.
Focus IV / ST type DYB from 2011.