REDSPEC wheel spacers 5 x 100 for SUBARU or TOYOTA and 5 x 114,3 for SUBARU 20 mm single bolt - stud bolt

REDSPEC wheel spacers 5 x 100 for SUBARU or TOYOTA and 5 x 114,3 for SUBARU

REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.

Specifications:
PCD: 5 x 100 ; 5 x 114.3 (only for SUBARU Impreza STI WRX type GD / GG and Impreza STI type G3)
Centre bore: 56.
Thread: M12 x 1.25.

Several models available:
- Without bolt: 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.

- With stud bolt: 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.

- With double bolts: 20 mm thick, bolts with pre-installed stud bolts and nuts
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
Notes:
1. Not suitable for SUBARU Impreza STI WRX type GD / GG and Impreza STI type G3.
2. If the thickness of the wheel spacers is less than the length of the original stud bolts, the correct contact between the wheel rims and the spacers cannot be guaranteed. Thus, the stud bolts should be shortened accordingly.

For:
- SUBARU
BRZ type CZ from 2012.
Impreza type G3 from 10/2007.
Impreza type GC/GF/GFC/GG/GD/GDI from 08/1992 to 12/2004.
Forester type SG from 2002 to 06/2008.
Forester type SH from 07/2008.
Legacy type BL/BP from 2003.
Impreza STI WRX type GD / GG from 01/2005.
Impreza STI type G3 from 03/2008.

- TOYOTA GT 86 Coupé type ZN6 from 03/2012.