REDSPEC
REDSPEC wheel spacers 5 x 100 for AUDI or SEAT or VOLKSWAGEN
- Similar products
-
In stock at supplierSave 47% offIn stockSave 25% offIn stockUp to 25% offPartially availableUp to 40% offPartially availableIn stock at supplierIn stock at supplier
REDSPEC wheel spacers 5 x 100 for AUDI or SEAT or VOLKSWAGEN
REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.
Specifications:
PCD: 5 x 100.
Centre bore: 57.
Thread: M14 x 1.50.
Several models available:
- Without bolts: 12, 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.
- With single conical bolts: 12, 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.
Note: The wheel spacers can only be fitted into aftermarket alloy rims with conical seat.
- With double bolts: 25, 30 or 35 mm thick, bolts with socket head screw and pre-installed steel bush.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
For:
- AUDI :
A1 type 8X from 05/2010.
A2 type 8Z0 from 02/2000 to 08/2005.
A3 type 8L from 09/1996 to 04/2003.
S3 type 8L from 1998 to 2003.
TT I type 8N from 10/1998 to 07/2006.
- SEAT :
Cordoba III type 6L from 10/2002.
Ibiza IV type 6L from 2002 to 04/2008.
Ibiza V type 6J from 05/2008.
Leon I type 1M from 11/1999 to 08/2005.
Leon I Cupra R type 1M from 11/1999 to 08/2005.
Toledo 2.0 16V type 1L from 1991 to 1999.
Toledo II type 1M from 1999 to 10/2004.
- VOLKSWAGEN :
Bora type 1J from 1997 to 2002.
Corrado type 53I 2.9i VR6 from 08/1987 to 02/1995.
Fox type 5Z from 2005.
Golf III 2.0i GTi type 1HX0 / 2.9i VR6 type 1HX from 1991 to 1996.
Golf IV type 1J from 08/1997 to 08/2003.
New beetle type 9C from 1998.
New beetle Cabrio type 1Y from 2003.
Passat type 3A2 / 35I from 02/1988 to 06/1996.
Polo Cross IV type 9N from 2001 to 2004.
Polo Fox IV type 9N from 2005 to 05/2009.
Polo Fun IV type 9N from 2005 to 05/2009.
Polo V type 6R from 06/2009.
Vento type 1HX0 from 11/1991 to 09/1998.
REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.
Specifications:
PCD: 5 x 100.
Centre bore: 57.
Thread: M14 x 1.50.
Several models available:
- Without bolts: 12, 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.
- With single conical bolts: 12, 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.
Note: The wheel spacers can only be fitted into aftermarket alloy rims with conical seat.
- With double bolts: 25, 30 or 35 mm thick, bolts with socket head screw and pre-installed steel bush.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
For:
- AUDI :
A1 type 8X from 05/2010.
A2 type 8Z0 from 02/2000 to 08/2005.
A3 type 8L from 09/1996 to 04/2003.
S3 type 8L from 1998 to 2003.
TT I type 8N from 10/1998 to 07/2006.
- SEAT :
Cordoba III type 6L from 10/2002.
Ibiza IV type 6L from 2002 to 04/2008.
Ibiza V type 6J from 05/2008.
Leon I type 1M from 11/1999 to 08/2005.
Leon I Cupra R type 1M from 11/1999 to 08/2005.
Toledo 2.0 16V type 1L from 1991 to 1999.
Toledo II type 1M from 1999 to 10/2004.
- VOLKSWAGEN :
Bora type 1J from 1997 to 2002.
Corrado type 53I 2.9i VR6 from 08/1987 to 02/1995.
Fox type 5Z from 2005.
Golf III 2.0i GTi type 1HX0 / 2.9i VR6 type 1HX from 1991 to 1996.
Golf IV type 1J from 08/1997 to 08/2003.
New beetle type 9C from 1998.
New beetle Cabrio type 1Y from 2003.
Passat type 3A2 / 35I from 02/1988 to 06/1996.
Polo Cross IV type 9N from 2001 to 2004.
Polo Fox IV type 9N from 2005 to 05/2009.
Polo Fun IV type 9N from 2005 to 05/2009.
Polo V type 6R from 06/2009.
Vento type 1HX0 from 11/1991 to 09/1998.
Ref.: 8301027_5-100
See all the Wheel spacers REDSPECSee all REDSPEC productsThis product is suitable for the following vehicles:
| Universe | Competition |
|---|---|
| Oreca Reference | 8301027_5-100 |
| Brand | REDSPEC |
| Vehicle categories | 1140, 1146, 1147, 1161, 1369, 1377, 1391, 1392, 1393, 1394, 1395, 1403, 1404, 1405, 1462, 1463, 1464, 1470 |
