REDSPEC
REDSPEC wheel spacers 4 x 108 for CITROEN or PEUGEOT
- Similar products
-
Save 15% offIn stockSave 15% off
SPEEDLINE SPEEDLINE Aftermarket rim type 434 6.75x15 4x108 ET8 CB65.1 gloss anthracite
€225.00€191.26In stockSave 15% offIn stockSave 15% offIn stockSave 15% offIn stock
REDSPEC wheel spacers 4 x 108 for CITROEN or PEUGEOT
REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.
Specifications:
PCD: 4 x 108.
Centre bore: 65.
Several models available:
- Without bolts: 12, 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.
- With single conical bolt: 12, 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.
The wheel spacers can only be fitted into aftermarket alloy rims with conical seat.
NOTE: this bolt type is not suitable for the following models:
- CITROEN C2 type J, C3 type F from 08/2003 to 2009 / type S, C4 I type L / II type N, C5 type R, DS3 type S, DS4 type N and DS5 type K.
- PEUGEOT 106 type 1, 206 / CC type, 207 type W, 208 type C, 307 / CC type 3 and 308 I type 4.
- With double bolts: 25, 30, 35, 40 or 50 mm thick, bolts with socket head screw and pre-installed steel bush.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
For:
- CITROEN :
AX GTi type ZA from 1991 to 1998.
BX type XB from 1982 to 1994.
C2 type J from 08/2003 to 2010.
C3 type F from 2002 to 2009.
C3 type S from 2009.
C4 I type L from 2004 to 11/2010.
C4 II type N from 01/2010.
C5 type D from 2000 to 07/2003.
C5 type R from 08/2003 to 05/2008.
Xantia type X from 1993 to 2001.
Xsara type N from 1997 to 2005.
Saxo type S0 / S1 from 02/1996 to 04/2004.
Visa GTi from 06/1986 to 03/1991.
ZX type N2 from 1991 to 1998.
DS3 type S from 01/2010.
DS4 type N from 2011.
DS5 type K from 2011.
- PEUGEOT :
106 type 1A / 1C from 1991 to 2003.
106 type 1 from 08/2003 to 2005.
205 type 741A/C from 02/1983 to 09/1998.
206 type 2 from 1998 to 07/2003.
206 from 08/2003.
207 type W from 2006.
208 type C from 2012.
305 type 581M from 10/1982 to 07/1990.
306 type 7B/N3/N5/Cabriolet from 05/1993 to 06/2001.
307 / CC type 3 from 08/2003.
308 I type 4 from 11/2007 to 08/2013.
309 type 10C/10A from 10/1985 to 12/1993.
405 type 15B from 01/1987 to 11/1996.
406 type 8B from 08/1996 to 10/2003.
REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.
Specifications:
PCD: 4 x 108.
Centre bore: 65.
Several models available:
- Without bolts: 12, 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.
- With single conical bolt: 12, 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.
The wheel spacers can only be fitted into aftermarket alloy rims with conical seat.
NOTE: this bolt type is not suitable for the following models:
- CITROEN C2 type J, C3 type F from 08/2003 to 2009 / type S, C4 I type L / II type N, C5 type R, DS3 type S, DS4 type N and DS5 type K.
- PEUGEOT 106 type 1, 206 / CC type, 207 type W, 208 type C, 307 / CC type 3 and 308 I type 4.
- With double bolts: 25, 30, 35, 40 or 50 mm thick, bolts with socket head screw and pre-installed steel bush.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
For:
- CITROEN :
AX GTi type ZA from 1991 to 1998.
BX type XB from 1982 to 1994.
C2 type J from 08/2003 to 2010.
C3 type F from 2002 to 2009.
C3 type S from 2009.
C4 I type L from 2004 to 11/2010.
C4 II type N from 01/2010.
C5 type D from 2000 to 07/2003.
C5 type R from 08/2003 to 05/2008.
Xantia type X from 1993 to 2001.
Xsara type N from 1997 to 2005.
Saxo type S0 / S1 from 02/1996 to 04/2004.
Visa GTi from 06/1986 to 03/1991.
ZX type N2 from 1991 to 1998.
DS3 type S from 01/2010.
DS4 type N from 2011.
DS5 type K from 2011.
- PEUGEOT :
106 type 1A / 1C from 1991 to 2003.
106 type 1 from 08/2003 to 2005.
205 type 741A/C from 02/1983 to 09/1998.
206 type 2 from 1998 to 07/2003.
206 from 08/2003.
207 type W from 2006.
208 type C from 2012.
305 type 581M from 10/1982 to 07/1990.
306 type 7B/N3/N5/Cabriolet from 05/1993 to 06/2001.
307 / CC type 3 from 08/2003.
308 I type 4 from 11/2007 to 08/2013.
309 type 10C/10A from 10/1985 to 12/1993.
405 type 15B from 01/1987 to 11/1996.
406 type 8B from 08/1996 to 10/2003.
Ref.: 8301018_4-108
See all the Wheel spacers REDSPECSee all REDSPEC productsThis product is suitable for the following vehicles:
| Universe | Competition, Historic Vehicles |
|---|---|
| Oreca Reference | 8301018_4-108 |
| Brand | REDSPEC |
| Vehicle categories | 1188, 1189, 1190, 1191, 1193, 1194, 1198, 1199, 1204, 1205, 1206, 1276, 1277, 1278, 1279, 1280, 1281, 1282, 1283, 1286, 1287, 1288, 1292, 1293, 1296, 1297, 1298, 1299, 1300, 1302, 1303, 1421, 1422, 1423, 1424, 1425, 1448, 1454, 1457, 1458, 1459, 1460 |
