REDSPEC wheel spacers 4 x 100 for TOYOTA 16 mm single bolt - stud bolt

REDSPEC wheel spacers 4 x 100 for TOYOTA

REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.

Specifications:
PCD: 4 x 100
Centre bore: 54.
Thread: M12 x 1.50.

Several models available:
- Without bolt: 16 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.

- With stud bolt: 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.

- With double bolts: 20 mm thick, bolts with pre-installed stud bolts and nuts
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
Note: If the thickness of the wheel spacers is less than the length of the original stud bolts, the correct contact between the wheel rims and the spacers cannot be guaranteed. Thus, the stud bolts should be shortened accordingly.

For:
- TOYOTA Celica type T16 / T18C / T18F from 09/1985 to 01/1994.
- TOYOTA Yaris type P1 from 1999 to 2005.
- TOYOTA Yaris type XP9 from 2006 to 2011.
- TOYOTA Yaris type XP13 from 2013.
- TOYOTA Yaris verso type P / 7P2 / P1F from 11/1999.