REDSPEC wheel spacers 4 x 100 for RENAULT Clio / Capture

REDSPEC wheel spacers 4 x 100 for RENAULT Clio / Capture

REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.

Specifications:
PCD: 4 x 100
Centre bore: 60.
Thread: M12 x 1.50.

Several models available:

- Without bolt: 17 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.

- With single conical bolt: 17 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.
This type of bolt is for the following models: RENAULT Clio I / II, Megane I, Twingo I, Alpine GT, R5, R9, R11 and R19.

- With double bolts: 25, 30, 35, 40 or 50 mm thick, bolts with socket head screw and pre-installed steel bush.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.

For RENAULT:
Clio I type B/C57 from 05/1990 to 08/1998.
Clio II type BB0 from 09/1998 to 2004.
Clio III / RS type BRO /1-CRO/1 from 05/2005 to 12/2012.
Clio IV type R from 09/2012.
Megane I type DA from 1995 to 2002.
Megane II type DA NO RS from 2002 to 08/2008.
Twingo I type C06 from 05/1997 to 2007.
Twingo II type CN from 09/2007.
Alpine GT type D501 / D502 / D503 from 06/1980 to 01/1985.
R5 / R9 / R11 / R19.
Capture from 03/2013.