REDSPEC wheel spacers 4 x 100 for HONDA with bolt

REDSPEC wheel spacers 4 x 100 for HONDA with bolt

REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.

Specifications:
PCD: 4 x 100.
Centre bore: 56.
Thread: M12 x 1.50.

Several models available:

- With stud bolt: 12, 16 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.

- With double bolts: 20 mm thick, bolts with pre-insatlled stud bolts and nuts
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.
Note: If the thickness of the wheel spacers is less than the length of the original stud bolts, the correct contact between the wheel rims and the spacers cannot be guaranteed. Thus, the stud bolts should be shortened accordingly.

For wheel spacers without bolts, see wheel spacers part number 8301039_4-100.

For HONDA :
Civic II type AF/AG/AH/AL/AS from 10/1983 to 09/1987.
Civic III type EC/EE from 10/1987 to 09/1991.
Civic IV type MA from 09/1994 to 01/1997.
Civic V type EG/EH/EK/EJ NO type R from 08/1993 to 02/2001.
Accord SY from 12/1997 to 06/2003.
Prelude SN/AB/BA2/BA4 from 02/1992 to 12/1996.