REDSPEC wheel spacers 4 x 100 for FIAT or LOTUS or OPEL

REDSPEC wheel spacers 4 x 100 for FIAT or LOTUS or OPEL

REDSPEC wheel spacers are manufactured in high quality anodized aluminium, and are available for a wide range of applications.
Sold by pair.
Made in Italy.

Specifications:
PCD: 4 x 100.
Centre bore: 56.5.
Thread: M12 x 1.50.

Several models available:
- Without bolt: 17 or 20 mm thick
The bolts are not supplied with the wheel spacers.
These spacers may require longer studs or bolts depending on the length of the original and width of the spacer required.

- With single conical bolt: 17 or 20 mm thick
The wheel spacers are supplied with the mounting hardware.
The supplied bolts are longer than the original one and adapted to the width of the wheel spacer.
Note: The wheel spacers can only be fitted into steel rims or original alloy wheels.

- With double bolts: 25, 30 or 35 mm thick, bolts with socket head screw and pre-installed steel bush.
Configuration used for important wheel spacers.
A set of bolts allows to fix the wheel spacer on the hub, while the other allows to fix the wheel on the wheel spacer.

For:
- FIAT :
Grande Punto type 199 from 10/2005 to 09/2009.
Punto Evo type 199 from 10/2009.

- LOTUS :
Elise II Serie 2 (S2) from 2000 to 2010.
Elise III Serie 3 (S3) from 2010.

- OPEL :
Adam from 01/2013.
Astra type A / H (4 holes) from 2004 to 10/2009.
Corsa type A from 1982 to 1993.
Corsa type B from 1993 to 1999.
Corsa type C from 2000 to 2005.
Corsa type S-D (4 holes) from 10/2006.
Tigra type A from 07/1994 to 12/2000.
Tigra type XC / Twin Top from 2004 to 2009.
Calibra type A (4 holes) from 06/1990 to 07/1997.
Kadett type E from 08/1979 to 08/1994.