REDSPEC
N-Group brake discs for RENAULT Clio 3 RS & Mégane II RS 300x11 mm rear with bearing
Read the detailed description
€176.00
+
-
In stock Shipping within 24h


REDSPEC N-Group brake discs for RENAULT Clio 3 RS & Mégane II RS 300x11 mm rear with bearing

REDSPEC Group N discs undergo a specific heat treatment and a special machining process, ensuring powerful and long-lasting braking.
Associated with competition pads, they will allow later braking while preserving the rise in temperature.
You will thus save precious seconds during the race and during your track days!

Can be fitted in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.

Features :
Rear disc
Diameter 300 mm
Thickness 11 mm

For optimum performance, make sure to follow the running-in phase described below:
1. Plug the cooler inlet at 3/4
2. 2. Use ground (hard) inserts.
3. Gradually heat the discs for the first 15 kilometers.
4. 4. Use the vehicle normally without being violent on the brakes.
5. 5. Finish with 5 or 6 hard brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange paint should barely begin (560°C).

In order to operate with the best efficiency and last as long as possible, the disc temperatures must be correct and balanced.
In general, all discs in a vehicle should operate at the same temperature.
The maximum disc temperature should be matched with the quality of the pads used.
The disc faces should not exceed the maximum temperatures recommended for each type of insert.


Ref.: 1DV002127

See all the Gr.N brake discs REDSPECSee all REDSPEC products
More Information
Universe Competition, Track days
Color Not specified
Oreca Reference 1DV002127
Manufacturer's reference 1422127
Brand REDSPEC
Vehicle categories 1329, 1451, 1452