REDSPEC N-Group brake discs for Ford Fiesta ST182/200 MK7 278x23 front

REDSPEC N-Group brake discs for Ford Fiesta ST182/200 MK7 278x23 front

REDSPEC Group N discs undergo a specific heat treatment and a special machining process, ensuring powerful and durable braking.
Combined with competition pads, they will allow later braking while preserving the temperature rise.
You will gain precious seconds in races and during your track days!

Can be fitted in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.

Features :
Front disc
Ventilated type
Diameter 278 mm
Thickness 23 mm
Bore 63,5 mm
Number of holes 4


Suitable for :
Ford Fiesta ST 1.5 200 hp from 2018

For optimum performance, please ensure that you follow the running-in procedure described below:

1. Plug the cooler inlet 3/4 of the way in.
2. Use lapped (hard) pads
3. Heat the discs progressively for the first 15 km.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 hard brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange should have just started (560°C).

In order to operate at maximum efficiency and last as long as possible, the temperatures of the discs must be correct and balanced.
In general, the discs in a vehicle should all operate at identical temperatures.
The maximum disc temperature must be matched to the quality of the pads used.
The disc faces should not exceed the maximum recommended temperatures for each pad type.