REDSPEC Group N Rear Brake Discs for Volkswagen Golf III 226x10 mm

REDSPEC Group N Rear Brake Discs for Volkswagen Golf III 226x10 mm

Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TÜV approved.
Sold by pair.

Specifications:
Rear disc
Diameter 226 mm
Thickness 10 mm
Bore 39.9 mm
Number of holes: 5
Weight per disc: 4.4 kg

Brake discs for:
-Volkswagen Golf III 2.0 GTi 16V (150CV) from 08/92 to 04/96
-Volkswagen Golf III 2.0 GTi 16V (150CV) from 05/96 to 10/97
-Volkswagen Golf III 2.8 VR6 (174CV) from 01/92 to 10/97
-Volkswagen Golf III 2.8 VR6 (174CV) from 02/94 to 05/97
It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.
To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.