REDSPEC Group N Rear Brake Discs for PEUGEOT 405 247x10 mm

REDSPEC Group N Rear Brake Discs for PEUGEOT 405 247x10 mm

Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TUV approved.
Sold by pair.

Specifications
- Rear disc
- Ventilated
- Diameter : 247 mm
- Thickness : 10 mm
- Bore : 71 mm
- Number of holes : 4

Brake discs for :
- PEUGEOT 405 I (15B) 1.8 Turbo Diesel from 03/1988 to 12/1992
- PEUGEOT 405 I (15B) 1.9, 122 Cv from 01/1989 to 12/1992
- PEUGEOT 405 I (15B) 1.9, 126 Cv from 07/1987 to 12/1993
- PEUGEOT 405 I (15B) 1.9, 109 Cv from 07/1988 to 12/1992
- PEUGEOT 405 I (15B) 1.9, 120 Cv from 07/1988 to 12/1992
- PEUGEOT 405 I (15B) 1.9 Injection from 07/1987 to 12/1992
- PEUGEOT 405 I (15B) 1.9 Sport MI-16,158 Cv from 07/1987 to 11/1991
- PEUGEOT 405 I (15B) 1.9 Sport MI-16, 147 Cv from 04/1988 to 12/1992

- PEUGEOT 405 I Break (15E) 1.8 TD from 10/1988 to 08/1992
- PEUGEOT 405 I Break (15E) 1.9, 105 Cv from 10/1988 to 08/1992
- PEUGEOT 405 I Break (15E) 1.9, 109 Cv from 10/1988 to 08/1992
- PEUGEOT 405 I Break (15E) 1.9, 120 Cv from 10/1988 to 08/1992

- PEUGEOT 405 II (4B) 1.8 from 08/1992 to 10/1995
- PEUGEOT 405 II (4B) 1.9 TD from 08/1992 to 10/1995
- PEUGEOT 405 II (4B) 2.0 from 08/1992 to 10/1995
- PEUGEOT 405 II (4B) 2.0 16V from 06/1994 to 10/1995
- PEUGEOT 405 II (4B) 2.0 MI-16 from 08/1992 to 10/1995
- PEUGEOT 405 II (4B) 2.0 T 16 X4 from 08/1992 to 10/1995

- PEUGEOT 405 II Break (4E) 1.8 from 08/1992 to 10/1996
- PEUGEOT 405 II Break (4E) 1.9 TD from 08/1992 to 10/1996
- PEUGEOT 405 II Break (4E) 2.0 from 08/1992 to 10/1996

It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.

To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.