REDSPEC Group N Rear Brake Discs for Peugeot 205 or 309 247.5x8 mm
Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TUV approved.
Sold by pair.
Specifications:
Rear disc
Diameter 247.5 mm
Thickness 8 mm
Bore 71 mm
Number of holes: 4
Weight per disc: 2.53 kg
Brake discs for:
Peugeot 205 1.6 GTi (115CV) from 1983 to 1987
Peugeot 205 1.9 GTi (130CV) from 1987 to 1993
Peugeot 309 1.9 GTi (130CV) / 1.9 GTi 16V (160CV) from 1984
It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.
To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.
Ref.: 1DV00518
See all the Gr.N brake discs REDSPECSee all REDSPEC productsThis product is suitable for the following vehicles:
Universe | Competition, Track days |
---|---|
Oreca Reference | 1DV00518 |
Manufacturer's reference | 142518 |
Brand | REDSPEC |
Vehicle categories | 1282, 1283, 1300, 1302, 1459 |