REDSPEC Group N Rear Brake Discs for BMW X3 332x30 mm

REDSPEC Group N Rear Brake Discs for BMW X3 332x30 mm

Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TUV approved.
Sold by pair.

Specifications
- Rear disc
- Ventilated
- Diameter :332 mm
- Thickness :30 mm
- Bore : 75 mm
- Number of holes :5

Brake discs for :
- BMW X3 (E83) 2.0 d, 177 Hp from 09/2007
- BMW X3 (E83) 2.0 d, 150 Hp from 10/2004
- BMW X3 (E83) 2.0 i, 150 Hp from 07/2005
- BMW X3 (E83) 2.5 i, 192 Hp from 01/2004
- BMW X3 (E83) 2.5 si, 218 Hp from 09/2006
- BMW X3 (E83) 2.5 si xDrive, 211 Hp from 07/2006 to 12/2008
- BMW X3 (E83) 3.0 d, 204 Hp from 01/2004
- BMW X3 (E83) 3.0 d, 217 Hp from 01/2004
- BMW X3 (E83) 3.0 i xDrive, 231 Hp from 01/2004
- BMW X3 (E83) 3.0 sd, 286 Hp from 09/2006
- BMW X3 (E83) 3.0 si, 272 Hp from 09/2006
- BMW X3 (E83) xDrive 18 d, 136 Hp from 04/2009
- BMW X3 (E83) xDrive 18 d, 143 Hp from 09/2008
- BMW X3 (E83) xDrive 20 d, 177 Hp from 09/2008
- BMW X3 (E83) xDrive 20 d, 163 Hp from 09/2008
- BMW X3 (E83) xDrive 20 i, 150 Hp from 09/2008
- BMW X3 (E83) xDrive 25 i, 218 Hp from 09/2008
- BMW X3 (E83) xDrive 30 d, 218 Hp from 09/2008
- BMW X3 (E83) xDrive 30 d, 211 Hp from 09/2008
- BMW X3 (E83) xDrive 30 i, 272 Hp from 09/2008
- BMW X3 (E83) xDrive 35 d, 286 Hp from 09/2008

It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.

To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.