REDSPEC Group N Rear Brake Discs for BMW 5/ 6 or 7 370x24 mm

REDSPEC Group N Rear Brake Discs for BMW 5/ 6 or 7 370x24 mm

Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TUV approved.
Sold by pair.

Specifications
- Rear disc
- Ventilated
- Diameter : 370 mm
- Thickness : 24 mm
- Bore : 75 mm
- Number of holes : 5

Brake discs for :
- BMW 5 (F10, F18) 550 i, 449 Hp from 05/2013
- BMW 5 (F10, F18) 550 i, 408 Hp from 03/2010
- BMW 5 (F10, F18) 550 i xDrive, 449 Hp from 05/2013
- BMW 5 (F10, F18) 550 i xDrive, 408 Hp from 09/2010
- BMW 5 (F10, F18) M 550 d xDrive, 381 Hp from 01/2012

- BMW 5 Gran Turismo (F07) 550 i, 449 Hp from 05/2012
- BMW 5 Gran Turismo (F07) 550 i, 405 Hp from 10/2009 to 12/2010
- BMW 5 Gran Turismo (F07) 550 i, 408 Hp from 10/2009
- BMW 5 Gran Turismo (F07) 550 i xDrive, 449 Hp from 05/21012
- BMW 5 Gran Turismo (F07) 550 i xDrive, 408 Hp from 09/2010

- BMW 5 Touring (F11) 550 i, 449 Hp from 05/2013
- BMW 5 Touring (F11) 550 i, 408 Hp from 09/2010
- BMW 5 Touring (F11) M 550 d xDrive, 381 Hp from 01/2012

- BMW 6 Cabriolet (F12) 650 i, 405 Hp from 09/2011 to 12/2012
- BMW 6 Cabriolet (F12) 650 i, 449 Hp from 10/2011
- BMW 6 Cabriolet (F12) 650 i, 408 Hp from 03/2011
- BMW 6 Cabriolet (F12) 650 i xDrive, 449 Hp from 11/2011
- BMW 6 Cabriolet (F12) 650 i xDrive, 407 Hp from 06/2011

- BMW 6 Coupe (F13) 650 i, 407 Hp from 11/2010
- BMW 6 Coupe (F13) 650 i, 405 Hp from 09/2011 to 12/2012
- BMW 6 Coupe (F13) 650 i, 449 Hp from 10/2011
- BMW 6 Coupe (F13) 650 i xDrive, 449 Hp from 11/2011
- BMW 6 Coupe (F13) 650 i xDrive, 408 Hp from 06/2011

- BMW 7 (F01, F02, F03, F04) 750 d xDrive, 381 Hp from 07/2012
- BMW 7 (F01, F02, F03, F04) 750 i, 449 Hp from 10/2012
- BMW 7 (F01, F02, F03, F04) 750 i, 408 Hp from 10/2008
- BMW 7 (F01, F02, F03, F04) 750 i xDrive, 449 Hp from 10/2012
- BMW 7 (F01, F02, F03, F04) 750 i xDrive, 408 Hp from 09/2009
- BMW 7 (F01, F02, F03, F04) 760 i, 544 Hp from 09/2009

It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.

To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.