REDSPEC Group N Front Brake Discs for Subaru Impreza I/II 294x24 mm

REDSPEC Group N Front Brake Discs for Subaru Impreza I/II 294x24 mm

Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TÜV approved.
Sold by pair.

Specifications:
Ventilated front discs
Diameter 294 mm
Thickness 24 mm
Bore 58 mm
Number of holes: 5
Weight per disc: 6.5 kg

Brake discs for:
Subaru Forester III (SH) 2.0 D
Subaru Forester III (SH) 2.5
Subaru Impreza I GT 2.0 16V Turbo 4WD (217CV) from 1999 to 2000
Subaru Impreza II WRX 2.0 16V Turbo 4WD (218CV) from 2001 to 2003
Subaru Impreza II WRX 2.0 16V Turbo 4WD (225CV) from 2003 to 2005
Subaru Impreza / Break I 1.6i 16V Turbo AWD
Subaru Impreza / Break I 2.0i 16V Turbo 4X4
Subaru Impreza / Break I 2.0i 16V Turbo AWD WRX
Subaru Legacy V 4X4 / Break 2.0 D
Subaru Outback (BE-BH) 2.5 16V AWD
It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.
To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.