REDSPEC Group N Front Brake Discs for Citroen DS3 or Peugeot 206 RC 207 307 283x26 mm

REDSPEC Group N Front Brake Discs for Citroen DS3 or Peugeot 206 RC 207 307 283x26 mm

Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TÜV approved.
Sold by pair.

Specifications:
Ventilated front disc
Diameter 283 mm
Thickness 26 mm
Bore 66 mm
Number of holes: 4
Weight per disc: 7.16 kg

Brake discs for:
Citroen DS3 1.6 THP from 04/2010 or later
Citroen C4 1.4 16V
Citroen C4 1.6 16V
Citroen C5 / Break 2.0 16V
Citroen C5 / Break 2.0 16V HPI
Citroen C5 / Break 2.0 HDI
Citroen Xsara II 2.0 HDI
Citroen Xsara II 2.0i 16V (167CV) BOSCH from 08/2000 or later
Citroen Xsara II Break 2.0 HDI
Citroen Xsara II Break 2.0i 16V
Citroen Xsara Picasso 1.6
Peugeot 206 RC (177CV) from 07/2003 or later
Peugeot 207CC 1.6 16V from 02/2006 or later
Peugeot 207CC 1.6 16V HDI from 02/2006 or later
Peugeot 207/SW 1.6 16V VTI from 02/2006 or later
Peugeot 207/SW 1.6 16V HDI from 02/2006 or later
Peugeot 307CC 1.6 16V from 03/2005 or later
Peugeot 307CC 2.0 16V 103 KW from 10/2003 or later
Peugeot 307/SW 1.6 16V from 06/2001 or later
Peugeot 307/SW 2.0 16V from 06/2001 or later
Peugeot 307/SW 1.6 16V HDI from 02/2004 or later
Peugeot 307/SW 2.0 16V HDI from 06/2001 or later
It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.
To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.