REDSPEC Group N brake discs for RENAULT 21 255x10.5 mm rear

REDSPEC Group N Front Brake Discs for Renault Clio II or Megane or Twingo II RS 280x24 mm

Redspec's Group N Brake Discs undergo a specific heat treatment and machining process for powerful, long-lasting braking. Used with racing brake pads, they allow drivers to brake later and help prevent temperature spikes - helping you shave time off your race results!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TUV approved.
Sold by pair.

Specifications:
Ventilated front discs
Diameter 280 mm
Thickness 24 mm
Bore 61 mm
Number of holes: 4
Weight per disc: 7.1 kg

Brake discs for:
Renault Clio II 2.0 16V RS (172/182CV) from 2000
Renault Clio II Cup Circuit/Montagne
Renault Clio II RS from 03/1998 to 03/2001
Renault Laguna / Break 1.6i / 1.8i 16V
Renault Laguna Break 1.9 DTI / 2.0i
Renault Megane I 1.6i 16V BAO4 from 03/99 to 10/02
Renault Megane I 1.6i 16V SW KAO4 from 10/99 to 10/02
Renault Megane I 1.9 TD BAON/BAO5 from 03/99 to 10/02
Renault Megane I 1.9 TD SW KAO5/KAON from 10/99 to 10/02
Renault Megane II 1.6i 16V / Break from 11/02 or later
Renault Megane II 1.9 DCI from 11/02 or later
Renault Megane II 2.0 16V from 11/02 or later
Renault Megane III 08 1.4 16V from 04/09 or later
Renault Megane III 08 1.6 16V from 11/08 or later
Renault Megane III 08 2.0 16V from 02/09 or later
Renault Megane III 08 1.5 DCI from 11/08 or later
Renault Megane III 08 1.9 DCI from 11/08 or later
Renault Megane III 08 2.0 DCI from 04/09 or later
Renault Twingo II RS (133CV) from 2009
It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.
To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.