REDSPEC Group N brake discs for LANCIA / FIAT / AUTOBIANCHI 227x10.8 mm front

REDSPEC Group N brake discs for LANCIA / FIAT / AUTOBIANCHI 227x10.8 mm front

REDSPEC Group N discs undergo special heat treatment and specific machining, to provide powerful, durable braking.
Combined with competition brake pads, they will allow for later braking while maintaining the rise in temperature.
You will thus gain valuable seconds when racing or during track days!
Can be fitted as a direct replacement for your standard discs (identical dimensions).
Please check the compatibility of these discs with your vehicle.
These discs comply with standards ISO 9001, ISO/TS 16949 and TUV.
Sold as a pair.

Specifications:
Front disc
Ventilated
Diameter 227 mm
Thickness 10.8 mm
Bore 61.5 mm
Number of holes 4

Suitable for:
LANCIA Delta
AUTOBIANCHI A111 / A112 / Abarth
FIAT 124 from 01/1966 to 08/1974
FIAT 125 / 127 / 128 / 132
FIAT 131 from 06/1974 to 12/1985
FIAT 850 Sport Coupé / Spider
FIAT 900 E / T
FIAT Argenta / Fiorino / Panda
FIAT Regata / Ritmo / Uno
FIAT X1-9 1.3 / 1.5 from 10/1972 to 12/1989
FSO 125P - Polonez
INNOCENTI Koral

Suitable at the rear of FIAT 124 and FIAT X1/9 only.

For optimal performance, please comply with the running-in phase described below:
1. Block off 75% of the cooler intake 2. Use brake pads that have been run in (hard)
3. Warm the discs up gradually over the first 15 kilometres.
4. Drive normally, without braking sharply.
5. Brake sharply 5 or 6 times to finish off.
6. If heat protective paint is used (ref.CP26491), only the green paint (430°C) should have turned white, with the orange hardly touched (560°C).

To ensure optimal performance and durability, disc temperature must be correct and balanced.
Generally speaking, a vehicle's discs should all work at identical temperatures.
The maximum temperature of the disc must be compliant with the quality of the brake pads used.
The disc sides must not exceed the recommended maximum temperatures for each type of brake pad.