REDSPEC Group N brake discs for Ford Fiesta ST MK5 MK6 257.7x10.2 mm rear

REDSPEC Group N brake discs for Ford Fiesta ST MK5 MK6 257.7x10.2 mm rear

REDSPEC Group N discs undergo a specific heat treatment and machining process, ensuring powerful and durable braking.
Combined with competition pads, they will allow later braking while preserving the temperature rise.
You will gain precious seconds in races and during your track days!

Can be fitted in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.

Features :
Front disc
Ventilated type
Diameter 257.7 mm
Thickness 10.2 mm
Bore 63.5 mm
Number of holes 4


Suitable for :
Ford Fiesta ST 150 MK5
Ford Fiesta ST 182 MK6
Ford Fiesta ST 200 MK6

For optimum performance, make sure you follow the break-in procedure described below:

1. Plug the inlet of the coolers 3/4 of the way down.
2. Use honed (hard) pads
3. Heat the discs progressively for the first 15 km.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 hard brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange should have just started (560°C).

In order to operate at maximum efficiency and last as long as possible, the temperatures of the discs must be correct and balanced.
In general, the discs in a vehicle should all operate at identical temperatures.
The maximum disc temperature must be matched to the quality of the pads used.
The disc faces should not exceed the maximum recommended temperatures for each pad type.