REDSPEC Group N brake discs for FIAT Grande Punto ABARTH SS 2008 305,5x28 mm front

REDSPEC Group N brake discs for FIAT Grande Punto ABARTH SS 2008 305,5x28 mm front

REDSPEC Group N discs undergo a specific heat treatment and machining process, ensuring powerful and durable braking.
Combined with competition pads, they will allow later braking while preserving the rise in temperature.
You will save precious seconds during the race and on your track days!

Can be mounted in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.

Features :
Front disc
Ventilated type
Diameter 305.5 mm
Thickness 28 mm
Bore 60 mm
Number of holes 4

Suitable for:
FIAT Grande Punto ABARTH Essesse 2008

For optimal performance, be sure to observe the running-in phase described below:
1. Seal the chiller inlet to 3/4
2. Use ground (hard) plates
3. Gradually heat the discs for the first 15 kilometres.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 violent braking.
6. If thermal paints are used (reference CP26491) only the green paint (430°C) must have bleached and the orange must barely begin (560°C).

In order to operate at the highest efficiency and to last as long as possible, disc temperatures must be correct and balanced.
In general, all discs in a vehicle should operate at the same temperatures.
The maximum disc temperature must be in accordance with the quality of the pads used.
The disc faces must not exceed the maximum recommended temperatures for each type of insert.