REDSPEC Grooved and Drilled Rear Brake Discs for Subaru Impreza II 266x18 mm

REDSPEC Grooved and Drilled Rear Brake Discs for Subaru Impreza II 266x18 mm

These racing discs are drilled for improved pedal feel and heat management, and grooved to clean your pads of dust and debris with each brake - everything you need for optimal performance!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TÜV approved.
Sold by pair.

Specifications:
Ventilated rear discs
Diameter 266 mm
Thickness 18 mm
Bore 58 mm
Number of holes: 5
Weight per disc: 5.07 kg

Brake discs for:
-Subaru Impreza II 2.0 16V Turbo AWD WRX (218 cv) from 2001 to 2003
-Subaru Impreza II 2.0 16V Turbo AWD WRX (225 cv) from 2003 to 2005
It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.
To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.