REDSPEC Gr.N front brake disc for PEUGEOT 208 GTI 200 302X26

REDSPEC Gr.N front brake disc for PEUGEOT 208 GTI 200 302X26

REDSPEC Group N discs undergo a specific heat treatment and a special machining process, ensuring powerful and long-lasting braking.
Associated with competition pads, they will allow later braking while preserving the rise in temperature.
You will thus save precious seconds in the race and during your track days!

Can be fitted in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with the ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.

Characteristics :
Front disc
Type ventilated
Diameter 302 mm
Thickness 26 mm
Bore 65.1 mm
Number of holes 4

Suitable for :
PEUGEOT 208 GTi (200hp) is not suitable for the By Peugeot Sport version or the 30th anniversary.

For optimum performance, please make sure to follow the running-in phase described below:
1. 1. Plug the cooler inlet to 3/4
2. 2. Use ground (hard) inserts.
3. Gradually warm the discs for the first 15 kilometres.
4. 4. Use the vehicle normally without being violent on the brakes.
5. 5. Finish with 5 or 6 violent brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange paint should just begin (560°C).

In order to operate with the best efficiency and last as long as possible, the disc temperatures must be correct and balanced.
In general, all discs in a vehicle should operate at the same temperature.
The maximum disc temperature should be matched with the quality of the pads used.
The disc faces should not exceed the maximum recommended temperatures for each type of insert.