REDSPEC drilled grooved brake discs for Ford Fiesta ST150/182/200 252.7x10.2 mm rear

REDSPEC drilled grooved brake discs for Ford Fiesta ST150/182/200 252.7x10.2 mm rear

With a radical look, the drilled grooved discs have openings to facilitate heat dissipation and channels to clean the pad surface with each braking action.
All the components for optimal braking!

Can be fitted in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.

Features :
Front disc.
Ventilated type.
Diameter : 257.7 mm.
Thickness : 10.2 mm.
Bore : 63.5 mm.
Number of holes : 4

Suitable for :
Ford Fiesta MK5 ST150
Ford Fiesta MK6 ST182
Ford Fiesta MK6 ST200

For optimum performance, please ensure that you follow the break-in procedure described below:

1. Plug the inlet of the coolers 3/4 of the way down.
2. Use honed (hard) pads
3. Heat the discs progressively for the first 15 km.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 hard brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange should have just started (560°C).

In order to operate at maximum efficiency and last as long as possible, the temperatures of the discs must be correct and balanced.
In general, the discs in a vehicle should all operate at identical temperatures.
The maximum disc temperature must be matched to the quality of the pads used.
The disc faces should not exceed the maximum recommended temperatures for each pad type.

Translated with www.DeepL.com/Translator (free version)