REDSPEC Drilled & Grooved brake discs for FIAT Idea - Punto II 1.8 16V HGT - Stilo / SW 1.2 16V / 1.6 16V - LANCIA Dedra II 1.8 ie 16V / 2.0 ie 16V - Delta II 1.8i 16V - Musa 1.3 MJ 257,5x22 mm - front

REDSPEC Drilled & Grooved brake discs for FIAT Idea - Punto II 1.8 16V HGT - Stilo / SW 1.2 16V / 1.6 16V - LANCIA Dedra II 1.8 ie 16V / 2.0 ie 16V - Delta II 1.8i 16V - Musa 1.3 MJ 257,5x22 mm - front

Featuring a radical look, the drilled grooved discs have openings for easy heat dissipation and channels to clean the pad surface with each brake application.
All components for optimal braking!

Fits in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.

Characteristics :
Diameter 257,5 mm
Thickness 22 mm
Bore 59 mm
Number of holes 4

Suitable for :
FIAT Idea 1.2i
FIAT Idea 1.3 MJ
FIAT Idea 1.4 16V
FIAT Punto II 1.8 16V HGT
FIAT Stilo / SW 1.2 16V
FIAT Stilo / SW 1.6 16V
LANCIA Dedra II 1.8 ie 16V
LANCIA Dedra II 2.0 ie 16V
LANCIA Delta II 1.8i 16V
LANCIA Musa 1.3 MJ

For optimum performance, please follow the running-in phase described below:

1. Plug the cooler inlet to 3/4
2. Use ground (hard) inserts
3. Gradually heat the discs for the first 15 kilometers.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 violent brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange paint should barely begin (560°C).

In order to operate at the best efficiency and last as long as possible, the disc temperatures must be correct and balanced.
In general, all discs in a vehicle should operate at the same temperature.
The maximum disc temperature should be in accordance with the quality of the pads used.
Disc faces should not exceed the maximum recommended temperatures for each type of wafer.