REDSPEC
Drilled & Grooved brake discs for AUDI A3 ou VOLKSWAGEN Golf V type 1KQ-1KD 253x10 mm - rear
- Similar products
-
Save 30% offSave 30% offIn stockSave 25% off
REDSPEC Grooved and Drilled Rear Brake Discs for Megane II or Twingo 1.6 RS 240x8 mm
€284.00€213.00In stockSave 40% offIn stock
REDSPEC Drilled & Grooved brake discs for AUDI A3 ou VOLKSWAGEN Golf V type 1KQ-1KD 253x10 mm - rear
Featuring a radical look, the grooved drilled discs have openings for easy heat dissipation and channels to clean the pad surface with each brake application.
All components for optimal braking!
Fits in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.
Characteristics :
Rear disc
Diameter 253 mm
Thickness 10 mm
Bore 65 mm
Number of holes 5
Disc weight 3.58 kg
Suitable for :
AUDI A3, Sportback, Quattro, Cabrio all models type 1KQ-1KD as from 05/03
SEAT Leon II all models with 253 mm discs from 09/05 onwards
SKODA Octavia all models with 253 mm discs from 06/04
VOLKSWAGEN Golf V type 1KQ-1KD as of 10/03
For optimum performance, please follow the running-in phase described below:
1. Plug the cooler inlet to 3/4
2. Use ground (hard) inserts
3. Gradually heat the discs for the first 15 kilometers.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 violent brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange paint should barely begin (560°C).
In order to operate at the best efficiency and last as long as possible, the disc temperatures must be correct and balanced.
In general, all discs in a vehicle should operate at the same temperature.
The maximum disc temperature should be in accordance with the quality of the pads used.
Disc faces should not exceed the maximum recommended temperatures for each type of wafer.
Featuring a radical look, the grooved drilled discs have openings for easy heat dissipation and channels to clean the pad surface with each brake application.
All components for optimal braking!
Fits in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV standards.
Sold in pairs.
Characteristics :
Rear disc
Diameter 253 mm
Thickness 10 mm
Bore 65 mm
Number of holes 5
Disc weight 3.58 kg
Suitable for :
AUDI A3, Sportback, Quattro, Cabrio all models type 1KQ-1KD as from 05/03
SEAT Leon II all models with 253 mm discs from 09/05 onwards
SKODA Octavia all models with 253 mm discs from 06/04
VOLKSWAGEN Golf V type 1KQ-1KD as of 10/03
For optimum performance, please follow the running-in phase described below:
1. Plug the cooler inlet to 3/4
2. Use ground (hard) inserts
3. Gradually heat the discs for the first 15 kilometers.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 violent brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange paint should barely begin (560°C).
In order to operate at the best efficiency and last as long as possible, the disc temperatures must be correct and balanced.
In general, all discs in a vehicle should operate at the same temperature.
The maximum disc temperature should be in accordance with the quality of the pads used.
Disc faces should not exceed the maximum recommended temperatures for each type of wafer.
Ref.: 1DVHPD1022
See all the Grooved - Drilled brake discs REDSPECSee all REDSPEC products| Universe | Competition, Track days |
|---|---|
| Oreca Reference | 1DVHPD1022 |
| Manufacturer's reference | HPD1022 |
| Brand | REDSPEC |
