REDSPEC drilled brake discs only for Abarth 500 595 695 284x22 mm front

Drilled brake discs only for Abarth 500 595 695 284x22 mm front

The drilled discs have a radical look and have openings to facilitate heat dissipation.
All the components for optimal braking!

Can be fitted in place of your original discs (identical dimensions).
Please check carefully the compatibility of these discs with your vehicle.
These discs comply with ISO 9001, ISO/TS 16949 and TÜV.
Sold in pairs.

Characteristics :
- Disc: front
- Type: ventilated and drilled
- Diameter: 284 mm
- Thickness: 22 mm

Suitable for :
- Abarth 500 595 695 from 2008

For optimum performance, make sure you follow the running-in procedure described below:
1. Plug the cooler inlet 3/4 of the way in.
2. Use lapped pads (hard)
3. Heat the discs progressively for the first 15 km.
4. Use the vehicle normally without being violent on the brakes.
5. Finish with 5 or 6 hard brake applications.
6. If thermal paints are used (part number CP26491) only the green paint (430°C) should have whitened and the orange should have just started (560°C).

In order to operate at maximum efficiency and last as long as possible, the temperatures of the discs must be correct and balanced.
In general, the discs in a vehicle should all operate at identical temperatures.
The maximum disc temperature must be matched to the quality of the pads used.
The disc faces should not exceed the maximum recommended temperatures for each pad type.