REDSPEC drilled and grooved brake discs for RENAULT Clio IV 1.6 RS 320x28 mm - front

REDSPEC drilled and grooved brake discs for RENAULT Clio IV 1.6 RS 320x28 mm - front

With their radical styling, these drilled and grooved brakes have apertures that facilitate heat dissipation and channels that clean the brake pad surface every time you brake.
All the components required for optimal braking!
Can be fitted as a direct replacement for your standard discs (identical dimensions).
Please check the compatibility of these discs with your vehicle.
These discs comply with standards ISO 9001, ISO/TS 16949 and TÜV.
Sold as a pair.

Specifications:
- Front disc.
- Ventilated.
- Diameter: 320 mm.
- Thickness: 28 mm.
- Bore: 68 mm.
- Number of holes: 5.

Suitable for:
- RENAULT Clio IV 1.6 RS from 03/2013

- RENAULT Grand Scenic III (JZ0/1) 2.0 dCi (JZ0L) from 04/2009
- RENAULT Grand Scenic III (JZ0/1) 2.0 dCi (JZ0Y) from 02/2009

- RENAULT Laguna Coupe (DT0/1) 2.0 dCi from 09/2008
- RENAULT Laguna Coupe (DT0/1) 2.0 dCi (DT01, DT09, DT12, DT1D) from 09/2008
- RENAULT Laguna Coupe (DT0/1) 2.0 dCi GT (DT11, DT1E, DT1N) from 09/2008
- RENAULT Lagune Coupe (DT0/1) 2.0 GT from 09/2008
- RENAULT Laguna Coupe (DT0/1) 3.0 dCi from 01/2012
- RENAULT Laguna Coupe (DT0/1) 3.0 dCi (DT03) from 09/2008
- RENAULT Laguna Coupe (DT0/1) 3.5 V6 (DT0P) from 09/2008

- RENAULT Laguna III (BT0/1) 2.0 dCi (BT01, BT09, BT12, BT1S) from 10/2007
- RENAULT Laguna III (BT0/1) 2.0 dCi (BT08, BT0K, BT0J, BT14, BT1A, BT1D) from 10/2007
- RENAULT Laguna III (BT0/1) 2.0 dCi (BT0M, BT0N, BT19) from 01/2008
- RENAULT Laguna III (BT0/1) 2.0 dCi GT (BT1E, BT1N) from 03/2008
- RENAULT Laguna III (BT0/1) 2.0 GT from 03/2008
- RENAULT Laguna III (BT0/1) 3.0 dCi (BT03, BT13) from 09/2008
- RENAULT Laguna III (BT0/1) 3.5 V6 (BT0C, BT0P) from 04/2008
- RENAULT Laguna III Grandtour (KT0/1) 2.0 dCi (KT01, KT08, KT0K, KT0J, KT1A, KT1D) from 10/2007
- RENAULT Laguna III Grandtour (KT0/1) 2.0 dCi (KT01, KT09, KT12, KT1S) from 10/2007
- RENAULT Laguna III Grandtour (KT0/1) 2.0 dCi (KT0M, KT0N, KT19) from 01/2008
- RENAULT Laguna III Grandtour (KT0/1) 2.0 dCi GT (KT11, KT1E, KT1N) from 03/2008
- RENAULT Laguna III Grandtour (KT0/1) 2.0 GT from 03/2008
- RENAULT Laguna III Grandtour (KT0/1) 3.0 dCi (KT03, KT13) from 09/2008
- RENAULT Laguna III Grandtour (KT0/1) 3.5 V6 (KT0C, KT0P) from 04/2008

For optimal performance, please comply with the running-in phase described below:
1. Block off 75% of the cooler intake 2. Use brake pads that have been run in (hard).
3. Warm the discs up gradually over the first 15 kilometres.
4. Drive normally, without braking sharply.
5. Brake sharply 5 or 6 times to finish off.
6. If heat protective paint is used (ref.CP26491), only the green paint (430°C) should have turned white, with the orange hardly touched (560°C).

To ensure optimal performance and durability, disc temperature must be correct and balanced.
Generally speaking, a vehicle's discs should all work at identical temperatures.
The maximum temperature of the disc must be compliant with the quality of the brake pads used.
The disc sides must not exceed the recommended maximum temperatures for each type of brake pad.