PAGID Brake Pads Shape n°8093 Compound RST4

PAGID Brake Pads Shape n°8093 Compound RST4

RST4 is a semi metallic resin bonded material containing steel fibers. This material has a medium friction level and high temperature resistance.

Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.

All PAGID products are made in Germany!

Length x Width : 130,3 mm x 58 mm
Thickness : 28,5 mm

Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering

Rear brake pads for :

Alpina B6 GT3 race car (years 2013 à - )
Ginetta G55 GT3 race car (years à - ) - NB : PFC Brakes

For brake calipers :

PFC - ZR22 4 piston - pad thickness : 28.5 mm

On vehicle bedding-in procedure:

Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.

Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).