PAGID
Brake Pads Shape n°4939 Compound RS44
- Similar products
-
PAGID Brake Pads Shape n°4939 Compound RS44
RS44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and aramid fibers. The smooth progression of friction from cold to hot makes this material easy to work with.
Very good rear axle pad for all front engine cars. Very popular club racing compound.
All PAGID products are made in Germany!
Length x Width : 116,5 mm x 43 mm
Thickness : 16,2 mm
Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering
On vehicle bedding-in procedure:
Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).
Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.
Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).
RS44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and aramid fibers. The smooth progression of friction from cold to hot makes this material easy to work with.
Very good rear axle pad for all front engine cars. Very popular club racing compound.
All PAGID products are made in Germany!
Length x Width : 116,5 mm x 43 mm
Thickness : 16,2 mm
Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering
On vehicle bedding-in procedure:
Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).
Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.
Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).
Ref.: PFPA4939RS44
See all the Brake pads PAGIDSee all PAGID products| Homologation | Non homologuée route |
|---|---|
| Oreca Reference | PFPA4939RS44 |
| Manufacturer's reference | S4939R44001 |
| Brand | PAGID |
