PAGID Brake Pads Shape n°2555 Compound RST1

PAGID Brake Pads Shape n°2555 Compound RST1

RST1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications.

Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.

All PAGID products are made in Germany!

Length x Width : 121 mm x 60 mm
Thickness : 20 mm

Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering

Front brake pads for :

Ford Fiesta R2 Spec 2015 Tarmac Rally (years 2015 à - )
Opel Adam Rallye R2 (years 2014 à - )

For brake calipers :

Brakeman - F4 Tornado - pad thickness : 20.0 mm
Coleman - Series I & II - pad thickness : 20.0 mm
Outlaw - 3000 / 3500 / 4000 - pad thickness : 20.0 mm
Wilwood - Superlite - pad thickness : 20.0 mm

On vehicle bedding-in procedure:

Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.

Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).