EBC BRAKES YELLOWSTUFF Rear Brake Pads for Ford Focus RS + Other Models

EBC BRAKES YELLOWSTUFF Rear Brake Pads for Ford Focus RS + Other Models
EBC's Yellowstuff is a true performance pad that's at home on the street as it is on the track. Its high friction coefficient (0.5), longevity and excellent performance at high temperatures have gained it a following in trackday or drift driving. But the Yellowstuff compound requires no warm up and offers great bite and high friction at cold temperatures, making it perfectly safe for highway and street use.
Brake pads for the following models:
- Ford Focus 2.5 Turbo RS from 2009 to 2011, TRW calipers
- Ford Galaxy 1.6 Turbo from 2010, ATE calipers
- Ford Galaxy 2.0 from 2006, ATE calipers
- Ford Galaxy 2.0 Turbo from 2010 to, ATE calipers
- Ford Galaxy 2.0 Turbo from 2010 to, ATE calipers
- Ford Galaxy 2.3 from 2006 to, ATE calipers
- Ford Galaxy 1.6 TD from 2011 to, ATE calipers
- Ford Galaxy 1.8 TD from 2006 to, ATE calipers
- Ford Galaxy 2.0 TD from 2006 to, ATE calipers
- Ford Galaxy 2.2 TD from 2008 to 2008, ATE calipers
- Ford Galaxy 2.2 TD from 2008, ATE calipers
- Ford Mondeo 1.6 from 2007 to 2013, ATE calipers
- Ford Mondeo 1.6 Turbo from 2010 to 2013, ATE calipers
- Ford Mondeo 2.0 from 2007 to 2013, ATE calipers
- Ford Mondeo 2.0 Turbo from 2010 to 2013, ATE calipers
- Ford Mondeo 2.3 from 2007 to 2011, ATE calipers
- Ford Mondeo 2.5 Turbo from 2007 to 2011, ATE calipers
- Ford Mondeo 2.5 Turbo from 2007 to 2011, ATE calipers
- Ford Mondeo 1.6 TD from 2011 to 2013, ATE calipers
- Ford Mondeo 1.8 TD from 2007 to 2013, ATE calipers
- Ford Mondeo 1.8 TD from 2007 to 2013, ATE calipers
- Ford Mondeo 2.0 TD from 2007 to 2013, ATE calipers
- Ford Mondeo 2.0 TD from 2007 to 2013, ATE calipers
- Ford Mondeo 2.0 TD from 2007 to 2013, ATE calipers
- Ford Mondeo 2.0 TD from 2010 to 2013, ATE calipers
- Ford Mondeo 2.2 TD from 2008 to 2011, ATE calipers
Please verify that the pads will be compatible with your brake calipers.
IMPORTANT: these performance pads require careful bedding in. EBC Brakes recommends the following:
-To bring the pads to the right temperature and position, apply a series of light taps to the brake pedal while driving at low speeds (40 to 50 kmh / 25 to 40 mph). Never brake violently at the beginning of the bedding in process; doing so risks freezing your pads, causing permanent and irreversible damage.
-After several kilometers, gradually increase pedal pressure. After approximately 20 km, you can brake firmly 4 to 5 times, letting your brakes cool between each application.
-Allow your brakes to cool completely before using again.