EBC BRAKES YELLOWSTUFF Front Brake Pads for BMW E12 or Ford Sierra 2WD

EBC BRAKES YELLOWSTUFF Front Brake Pads for BMW E12 or Ford Sierra 2WD

EBC's Yellowstuff is a true performance pad that's at home on the street as it is on the track. Its high friction coefficient (0.5), longevity and excellent performance at high temperatures have gained it a following in trackday or drift driving. But the Yellowstuff compound requires no warm up and offers great bite and high friction at cold temperatures, making it perfectly safe for highway and street use.
Brake pads for the following models:
- BMW 518 1.8 (E12) from 1976 to 1979, ATE calipers
- BMW 518 1.8 (E12) from 1979 to 1981, ATE calipers
- BMW 520 2.0 (E12) from 1976 to 1979, ATE calipers
- BMW 520 2.0 (E12) from 1979 to 1981, ATE calipers
- BMW 525 2.5 (E12) from 1977 to 1978, ATE calipers
- BMW 525 2.5 (E12) from 1979 to 1981, ATE calipers
- BMW 528 2.8 (E12) from 1977 to 1978, ATE calipers
- BMW 528 2.8 (E12) from 1979 to 1981, ATE calipers
- BMW 628 2.8 (E24) from 1976 to 1982, ATE calipers
- BMW 630 3.0 (E24) from 1976 to 1979, ATE calipers
- BMW 633 3.3 (E24) from 1976 to 1982, ATE calipers
- BMW 635 3.5 (E24) from 1976 to 1982, ATE calipers
- BMW 728 2.8 (E23) from 1977 to 1978, ATE calipers
- BMW 728 2.8 (E23) from 1978 to 1982, ATE calipers
- BMW 728 2.8 (E23) from 1982 to 1986, ATE calipers
- BMW 730 3.0 (E23) from 1976 to 1979, ATE calipers
- BMW 732 3.2 (E23) from 1979 to 1986, ATE calipers
- BMW 733 3.3 (E23) from 1976 to 1982, ATE calipers
- BMW 735 3.5 (E23) from 1979 to 1981, ATE calipers
- BMW 735 3.5 (E23) from 1981 to 1986, ATE calipers
- BMW 745 4.5 (E23) from 1980 to 1981, ATE calipers
- BMW 745 4.5 (E23) from 1981 to 1986, ATE calipers
- BMW M1 3.5 from 1978 to 1982, ATE calipers
- BMW M5 3.5 (E28) from 1985 to 1988, ATE calipers
- BMW M635 3.5 (E24) from 1985 to 1989, ATE calipers
- Ford Sierra 2.0 Turbo Cosworth from 1985 to 1990, ATE calipers
Please verify that the pads will be compatible with your brake calipers.
IMPORTANT: these performance pads require careful bedding in. EBC Brakes recommends the following:
-To bring the pads to the right temperature and position, apply a series of light taps to the brake pedal while driving at low speeds (40 to 50 kmh / 25 to 40 mph). Never brake violently at the beginning of the bedding in process; doing so risks freezing your pads, causing permanent and irreversible damage.
-After several kilometers, gradually increase pedal pressure. After approximately 20 km, you can brake firmly 4 to 5 times, letting your brakes cool between each application.
-Allow your brakes to cool completely before using again.