Adjustable Fuel Pressure regulator Malpassi - Up to 10 BAR - Ethanol E85 compatible

Adjustable Fuel Pressure regulator - Up to 10 BAR

Replacing the standard fuel pressure regulator with an adjustable model can easily improve the performance of the standard injection system by eliminating throttle dips.
The installation of a pressure regulator can also be a cost-effective alternative when converting to Ethanol E85.

It can be installed in a bypass position between the pump and the injection rail, in which case three connectors are required.
It can also be installed in a standard position on the fuel return line, in which case one of the two ports can be plugged or connected to a pressure gauge.

Technical specifications :
Engines: Atmospheric or turbocharged
Air/fuel ratio: 1:1
Compatible avec le E85.
1 x Inlet connector, 8 mm tail
1 x Outlet/return connector, 8 mm tail
1 x 5mm tail connector mounted on 6x1mm thread

Base pressure adjustable from 1 to 10 bar (a suitable fuel pump is required).

This regulator is manufactured with a special alloy. Each component is assembled by hand before being tested to ensure perfect operation.