REDSPEC
Grooved and Drilled Front Brake Discs for Clio II or Megane or Twingo II RS 280x24 mm
Read the detailed description
Save
15% off
€165.00
€140.26
+
-
In stock Shipping within 24h
Free shipping ** Free shipping by Chronopost for any order.


REDSPEC Grooved and Drilled Front Brake Discs for Renault Clio II or Megane or Twingo II RS 280x24 mm

These racing discs are drilled for improved pedal feel and heat management, and grooved to clean your pads of dust and debris with each brake - everything you need for optimal performance!
These discs should be mounted in place of your original brake discs (identical dimensions).
Please check carefully that the discs are compatible with your vehicle.
ISO 9001, ISO/TS 16949 and TUV approved.
Sold by pair.

Specifications:
Ventilated front discs
Diameter 280 mm
Thickness 24 mm
Bore 61 mm
Number of holes: 4
Weight per disc: 7.1 kg

Brake discs for:
Renault Clio II 2.0 16V RS (172/182CV) from 2000
Renault Clio II Cup Circuit/Montagne
Renault Laguna / Break 1.6i / 1.8i 16V
Renault Laguna Break 1.9 DTI / 2.0i
Renault Megane I 1.6i 16V BAO4 from 03/99 to 10/02
Renault Megane I 1.6i 16V SW KAO4 from 10/99 to 10/02
Renault Megane I 1.9 TD BAON/BAO5 from 03/99 to 10/02
Renault Megane I 1.9 TD SW KAO5/KAON from 10/99 to 10/02
Renault Megane II 1.6i 16V / Break from 11/02
Renault Megane II 1.9 DCI from 11/02
Renault Megane II 2.0 16V from 11/02
Renault Megane III 08 1.4 16V from 04/09 or later
Renault Megane III 08 1.6 16V from 11/08 or later
Renault Megane III 08 2.0 16V from 02/09 or later
Renault Megane III 08 1.5 DCI from 11/08 or later
Renault Megane III 08 1.9 DCI from 11/08 or later
Renault Megane III 08 2.0 DCI from 04/09 or later
Renault Twingo II RS (133CV) from 2009

It is important to properly bed in your discs before use. Please respect the following steps:
1. Block air intake ducts approximately 3/4.
2. Use with previously bedded brake pads.
3. Use brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you may brake normally but without any violent movements.
5. Finish by applying more pressure to the brakes: 5-6 firm, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.

To maximise performance and longevity, your discs must be correctly balanced; in general all four discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.


Ref.: 1DVHPD547

See all the Grooved - Drilled brake discs REDSPECSee all REDSPEC products
More Information
Universe Competition, Track days
Oreca Reference 1DVHPD547
Manufacturer's reference HPD547
Brand REDSPEC
Vehicle categories 1327, 1336, 1340, 1449, 1450