REDSPEC grooved and drilled back brake discs for BMW M3 E46 / Serie 7 E38 740d / 750i / Z8 4.9 328x20 mm

REDSPEC grooved and drilled back brake discs for BMW M3 E46 / Serie 7 E38 740d / 750i / Z8 4.9 328x20 mm

The grooved and drilled brake discs allow heat dissipation and make it easy to clean the pad anytime you brake.

To assemble in the same place as your original brake discs. (identical dimensions)
Please check carefully the compatibility of your vehicle.
ISO 9001, ISO/TS 16949 et TÜV approved.
2 pieces delivered.

Features:
Ventilated type
Diameter: 328 mm
Thickness: 20 mm
Bore: 75 mm
5 holes.

WARNING, for the discs with the manufacturor references 34 216 767 062 ; 34 216 751 194 ; 34 211 160 233.

Suitable for:
BMW Série 3 (E46) M3
BMW Série 7 (E38) 740d
BMW Série 7 (E38) 750i/L
BMW Z8 (E52) 4.9

For optimum performance, please respect the following steps:

1. Block approximately 3/4 the air intake ducts.
2. Use with previously bedded brake pads.
3. Use the brakes lightly and intermittently for the first 15 kilometers.
4. After 15 km, you can brake normally but without any violent movements.
5. Then press the brakes: 5-6 harder, violent brakes.
6. If using heat-sensitive paint (product code CP26491), the green paint (430°C) should be white and the orange paint (560°C) should be slightly affected.

To maximise performance and durability, your discs must be correctly balanced; all the discs should function at the same temperature. Discs should never exceed the working temperature range for your brake pads.