Brake Pads Shape n°6004 Compound UTV1

PAGID Brake Pads Shape n°6004 Compound UTV1

UTV1 is a high friction metal-ceramic compound with outstanding initial bite and excellent release characteristics. It features a high thermal resistance and a flat friction curve up to high temperature levels.

Specifically developed for high friction level sprint applications of UTV racing where a very high initial bite and friction level are decisive.

All PAGID products are made in Germany!

Length x Width : 104 mm x 34,3 mm
Thickness : 8,8 mm

Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering

Rear brake pads for :

Yamaha YXZ1000R (years 2017 à - )

On vehicle bedding-in procedure:

Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.

Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).