Brake Pads Shape n°4907 Compound RSC2

PAGID Brake Pads Shape n°4907 Compound RSC2

RSC2 is a low metallic resin bonded material containing steel and aramid fibers. This material is specifically developed for above mentioned applications.

Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.

All PAGID products are made in Germany!

Length x Width : 176 mm x 110 mm
Thickness : 16 mm

Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering

Front brake pads for :

Audi A8 D3 (years 2002 à 2009) - NB : ceramic brakes
Audi R8 4.2 + 5.2 FSI quattro (years 2009 à 2015) - NB : ceramic brakes
Audi R8 5.2 FSI quattro 2nd generation (years 2015 à - )
Audi R8 5.2 FSI quattro 2nd generation (years 2015 à - ) - NB : ceramic brakes
Audi S8 (years 2002 à 2010) - NB : ceramic brakes
Lamborghini Gallardo (years 2004 à 2013) - NB : ceramic brakes
Lamborghini Huracán + Performance (years 2014 à - ) - NB : ceramic brakes

On vehicle bedding-in procedure:

Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.

Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).