PAGID
Brake Pads Shape n°4345 Compound RSL1
€319.00
+
-
On order Shipping within 14 days
Similar products

PAGID Brake Pads Shape n°4345 Compound RSL1

RSL1 is a low metallic resin bonded material containing steel and aramid fibers with high heat resistance. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness make this material appropriate for endurance races.

Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.

All PAGID products are made in Germany!

Length x Width : 130 mm x 82 mm
Thickness : 16,7 mm

Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering

Front brake pads for :

Lotus 3-Eleven 430 (years 2015 à - )
Lotus Evora 3.5 400 (years 2015 à - )
Lotus Evora 3.5 + 3.5S (years 2009 à 2016)
Lotus Exige V6 Sport 350 (years 2016 à - )
Renault Clio 3.0 V6 Turbo Sport (years 1998 à 2003)

Rear brake pads for :

Lotus 3-Eleven 430 (years 2015 à - )
Lotus Evora 3.5 400 (years 2015 à - )
McLaren 570S GT4 race car (years 2018 à - ) - NB : wider front caliper
McLaren 570 S GT4 race car (years 2020 à - ) - NB : Alcon front calipers
McLaren 570S GT4 race car (years 2016 à 2017)
McLaren 570S, 540C, 570 GT (years 2015 à - )
McLaren 650S / Spyder (years 2014 à 2017)
McLaren 675LT (years 2015 à - )
McLaren MP4-12C (years 2011 à 2014)

For brake calipers :

Alcon - RC4 - pad thickness : 16.7 mm
AP Racing - CP6600 D55 - pad thickness : 16.7 mm

On vehicle bedding-in procedure:

Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.

Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Ref.: PFPA4345RSL1

See all the Brake pads PAGIDSee all PAGID products
More Information
Homologation Non homologuée route
Oreca Reference PFPA4345RSL1
Manufacturer's reference S4345L01001
Brand PAGID
^Top