PAGID
Brake Pads Shape n°1616 Compound RST5
€537.00
+
-
In stock Shipping within 24h
Similar products

PAGID Brake Pads Shape n°1616 Compound RST5

Its enhanced fade resistance as well as the highest initial bite and friction level of the PAGID Racing compound portfolio make it suitable for thermally high-loaded applications, and make the RST5 a top-end sprint equipment in terms of performance. Due to its OTM feature, the generated heat remains in the brake pad and is not transmitted into the brake fluid. RST5 delivers the ideal balance between maximum performance and modulation.

Specifically designed and developed for high friction level sprint applications where an extreme thermal stability is demanded. Comes for a variety of different pad shapes established in GT racing front axles, Touring car front axles, rally sports, especially FIA Rally3, Rally2, Rally1, and RX Rallycross categories.

All PAGID products are made in Germany!

Length x Width : 140 mm x 61 mm
Thickness : 16 mm

Car applications, dimensions and pad schemes are supplied as a guide. Please check your assembly before ordering

Front brake pads for :

Audi S1 EKS RX quattro Rallycross racecar (years 2018 à - )
Citroën C3 N5 (years 2018 à - )
Citroën DS3 N5 spec. 2017 (years 2017 à 2018)
Fiat Abarth 124 Spider rally car (years 2017 à - )
Ford Fiesta N5 (years 2017 à - )
Ford Fiesta R5 Tarmac Rally (years 2015 à - )
Hyundai i20 N5 Spec. 2017 (years 2017 à - )
Hyundai i20 R5 Tarmac & Gravel Rally (years 2016 à - )
Nissan Micra N5 (years 2017 à - )
Peugeot 208 N5 Spec. 2017-2018 (years 2017 à - )
Proton Iriz R5 (years 2017 à - )
Renault Clio N5 (years 2017 à - )
Skoda Fabia R5 Tarmac & Gravel Rally (years 2017 à 2019)
Skoda Fabia RS Rallye S2000 (years 2015 à - )
VW Polo N5 (years 2018 à - )

Rear brake pads for :

Audi S1 EKS RX quattro Rallycross racecar (years 2018 à - )
Citroën C3 N5 (years 2018 à - )
Citroën DS3 N5 spec. 2017 (years 2017 à 2018)
Fiat Abarth 124 Spider rally car (years 2017 à - )
Ford Fiesta N5 (years 2017 à - )
Ford Fiesta R5 Tarmac Rally (years 2015 à - )
Hyundai i20 N5 Spec. 2017 (years 2017 à - )
Hyundai i20 R5 Tarmac & Gravel Rally (years 2016 à - )
Nissan Micra N5 (years 2017 à - )
Peugeot 208 N5 Spec. 2017-2018 (years 2017 à - )
Proton Iriz R5 (years 2017 à - )
Renault Clio N5 (years 2017 à - )
Skoda Fabia R5 Tarmac & Gravel Rally (years 2017 à 2019)
Skoda Fabia RS Rallye S2000 (years 2015 à - )
VW Polo N5 (years 2018 à - )

For brake calipers :

Brembo - 07.5169. [type 140 or B18 family] - pad thickness : 16.0 mm

On vehicle bedding-in procedure:

Step 1 - Breaking-in
Creating a perfect contact-pattern between rotor and brake pad surface.
10 stops with mid pressure and low temperature from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Step 2 - Heating-up
Warm up in order to initiate some core heat in the whole brake system.
A sequence of 5 stops with medium to high pressure from 180 km/h (112 MPH) to approximately 60 km/h (40 MPH) with maximum acceleration between the stops.

Step 3 - Recovery Stops
3 to 5 stops with mid pressure from 150 km/h (90 MPH) to approximately 80 km/h (50 MPH).

Ref.: PFPA1616RST5

See all the Brake pads PAGIDSee all PAGID products
More Information
Homologation Non homologuée route
Oreca Reference PFPA1616RST5
Manufacturer's reference S1616T05001
Brand PAGID
^Top