NEWTON
Classic 200 fuel tank cap
- Similar products
-
In stockIn stockIn stock
NEWTON Classic 200 fuel tank cap
Venting system that is adjustable by altering the position of the holes in the seal plates.
If an un-vented version is required, the vent hole can be blocked off with a dab of solder or epoxy resin.
Fitted with collars or flanges.
Fuel, oil and water tank caps.
Weight: 109.5 g.
Cover casting: Aluminium alloy
Anodised finish
Dimensions:
Length including catch (A): 80.5 mm, Diameter (B): 61.5 mm
Height (C): 29.0 mm
Thread: 2" x 18 tpi
Venting system that is adjustable by altering the position of the holes in the seal plates.
If an un-vented version is required, the vent hole can be blocked off with a dab of solder or epoxy resin.
Fitted with collars or flanges.
Fuel, oil and water tank caps.
Weight: 109.5 g.
Cover casting: Aluminium alloy
Anodised finish
Dimensions:
Length including catch (A): 80.5 mm, Diameter (B): 61.5 mm
Height (C): 29.0 mm
Thread: 2" x 18 tpi
Ref.: C20D
See all the Fuel caps NEWTONSee all NEWTON products| Universe | Competition, Historic Vehicles, Track days |
|---|---|
| Oreca Reference | C20D |
| Manufacturer's reference | C20D |
| Brand | NEWTON |
