MOTUL NGEN HYBRID 0W20 4L engine oil

MOTUL NGEN HYBRID 0W20 4L engine oil

This synthetic "fuel economy" engine lubricant has been specially developed for hybrid electric vehicles (H.E.V. - Hybrid Electric Vehicle) and rechargeable hybrids (P.H.E.V. - Plug-in Hybrid Electric Vehicle) equipped with very recent petrol engines, turbo or atmospheric, direct or indirect injection, designed to use SAE 0W-20 grade oils with low friction and very low HTHS (High Temperature High Shear) viscosity ≥ 2.6 mPa.s.

MOTUL NGEN HYBRID 0W-20 is specially formulated to meet the technical challenges imposed by petrol hybrid cars, such as fuel dilution, water emulsion, high number of false starts/stops and lower oil temperature operating conditions.
This state of the art formulation is part of a whole new sustainable concept at Motul as it contains 25% organic base oil (100% renewable plant based synthetic base oils) and is filled in a Motul canister made from 50% recycled and 100% recyclable plastic.
These organic base oils using renewable non-fossil materials limit the environmental impact and allow Motul to reduce its carbon footprint by 25% in the manufacturing process.

MOTUL NGEN is the common name for Motul's sustainable ranges using different technologies in formulations and packaging to reduce its carbon footprint.
This dedicated formula can also be used for petrol engines requiring a SAE 0W-20 viscosity grade lubricant or a Fuel Economy 20 viscosity grade lubricant: API SP and/or ILSAC GF 6A standards.

MOTUL NGEN HYBRID 0W-20 is also suitable for Battery Electric Vehicles (BEV) equipped with a petrol range extender engine.

Standards: API SERVICE SP ILSAC GF-6A

Recommended for: HONDA Hybrid, NISSAN Hybrid, and TOYOTA Hybrid

Properties :

- Viscosity grade SAE J 300 0W-20
- Density at 20°C (68°F) ASTM D1298 0.841
- Viscosity at 40°C (104°F) ASTM D445 46.8 mm²/s
- Viscosity at 100°C (212°F) ASTM D445 8.7 mm²/s
- HTHS viscosity at 150°C (302°F) ASTM D4741 2.7 mPa.s
- Viscosity Index ASTM D2270 166
- Pour point ASTM D97 -42°C / -44°F
- Flash point ASTM D92 232°C / 450°F
- Sulphated ash ASTM D874 0.72% mass
- TBN ASTM D2896 7.2 mg KOH/g