MOTUL Motor Oil 8100 X-MAX 0W40 - 5L

Engine oil 8100 X-MAX 0W40 1L

High performance lubricant 100% Synthetic with Full SAPS technology (Sulphated Ash, Phosphorus and Sulphur) specially designed for powerful and recent cars, equipped with petrol or diesel engines, direct or indirect injection, atmospheric or turbocharged.

Suitable for all types of fuel, petrol, diesel, LPG, CNG and biofuels.
Compatible with catalytic converters.

Standards: ACEA A3 / B4 API SERVICES SN / CF
Approvals : BMW LL-01 / MB-Approval 229.5 / PORSCHE A40 / VW502 00 - 505 00
Specifications: FORD WSS M2C 937 A
Performance: FIAT 9.55535-Z2

MOTUL 8100 X-max 0W-40 meets all these performance and durability requirements set by the manufacturers, as well as the latest international API standard requirements.
The API SN standard requires the lubricant to have outstanding detergent/dispersant performance, better resistance to viscosity increase due to deposits and high lubricating properties such as wear protection and high temperature resistance for better control of oil consumption and optimum engine protection over the entire oil change interval .

The SAE 0W-40 viscosity grade minimizes hydrodynamic friction in the oil, resulting in improved fuel economy especially when the oil is cold. Improved oil circulation at start up, faster pressurization of the lubricant, sharper engine rpm rise and faster engine warm-up.
Environmentally friendly, this type of oil reduces fuel consumption and greenhouse gas (CO2) emissions.

The formulation of MOTUL 8100 X-max 0W-40 is the perfect balance between fuel economy achieved through low cold viscosity and high engine protection (high HTHS > 3.5 mPa.s) thanks to the high shear resistance of the oil film at high temperatures.

Properties :

Viscosity grade SAE J 300 0W-40
Density at 20°C (68°F) ASTM D1298 0.841
Viscosity at 40°C (104°F) ASTM D445 76.2 mm²/s
Viscosity at 100°C (212°F) ASTM D445 13.5 mm²/s
Viscosity HTHS at 150°C (302°F) ASTM D4741 3.6 mPa.s
Viscosity index ASTM D2270 184
Pour point ASTM D97 -45°C / -49°F
Flash point ASTM D92 228°C / 442°F
Sulphated ash ASTM D874 1.1% mass
TBN ASTM D2896 10.1 mg KOH/g

Translated with www.DeepL.com/Translator (free version)