Engine oil 8100 X-Clean EFE 5W30 1L

MOTUL Engine oil 8100 X-Clean EFE 5W30 1L

Advanced 100% Synthetic lubricant that provides at the same time High Protection and Fuel
Economy. Approved by OEMs such as BMW Group, GM (General Motors) OPEL, MERCEDES and
VW for its EFE - Extra Fuel Economy - property. Specially designed for the latest generation cars,
powered by Gasoline and Diesel engines, naturally aspirated or turbocharged, direct or indirect
injection.
For vehicles that are Euro 4, 5 or 6 emission regulation compliant and require an ACEA C3 engine oil
i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of Sulfated Ash (=0.8%),
Phosphorus (0.07% = x = 0.09%) and Sulfur (= 0.3%), or an ACEA C2 engine oil i.e. a low friction, low
HTHS (= 2.9 mPa.s) viscosity and "Mid SAPS" oil with reduced content of Sulfated Ash (= 0.8%),
Phosphorus (= 0.09%) and Sulphur (= 0.3%).
Suitable when a "Fuel Economy" lubricant is required: ACEA C2 standard.
Compatible with Catalytic Converters (CAT) and Diesel Particulate Filters (DPF).
May be unsuitable for use in some engines. Always refer to the owner's manual if in doubt.

Performance :

Standards : ACEA C2/C3 API SERVICE SN
Approvals :
BMW Long Life-04
GM-OPEL dexos2™ (replaces GM-LL-A-025 & B-025) under N° D20247HE011
MB-Approval 229.52
OPEL/VAUXHALL OV0401547
VW 505 00 505 01
Performance: FIAT 9.55535-S1 / S3
Recommendations: HONDA, KIA / HYUNDAI, MITSUBISHI, NISSAN, SUBARU, SUZUKI,
SSANGYONG, TOYOTA,...

Properties :

Viscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0.851
Viscosity at 40°C (104°F) ASTM D445 70.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 12.1 mm²/s
Viscosity HTHS at 150°C (302°F) ASTM D4741 3.5 mPa.s
Viscosity index ASTM D2270 169
For point ASTM D97 -42°C / -44°F
Flash point ASTM D92 232°C / 450°F
Sulfated ash ASTM D874 0.78% weight
TBN ASTM D2896 7.8 mg KOH/g