MOTUL 8100 X-MAX 0W30 1L engine oil

MOTUL 8100 X-MAX 0W30 1L engine oil

This high performance 100% synthetic lubricant with Full SAPS technology (Sulphated Ash, Phosphorus and Sulphur) is specially designed for powerful and recent cars, equipped with high capacity engines, petrol and diesel, direct or indirect injection, with or without turbo.
The numerous manufacturer approvals make it a versatile product recommended when vehicles are under manufacturer's warranty.

MOTUL 8100 X-max 0W-30 meets all these performance and durability requirements set by the manufacturers, as well as the international requirements of ACEA and API standards.
The ACEA A3/B4 standard requires a very high level of detergent/dispersant performance from the lubricant, for better resistance to viscosity increase due to deposits and superior lubricating properties such as wear protection and high temperature resistance for better control of oil consumption and optimum engine protection over the entire oil change interval.

The SAE 0W-30 viscosity grade minimises hydrodynamic oil friction, resulting in improved fuel economy especially when the oil is cold.
Improved oil circulation at start-up, faster lubricant pressurisation, smoother engine speed rise and faster engine warm-up during start-up.

Environmentally friendly, this type of oil reduces fuel consumption and greenhouse gas (CO2) emissions.

The formulation of MOTUL 8100 X-max 0W-30 is the perfect balance between fuel economy achieved through
low viscosity when cold and high engine protection when hot (high HTHS > 3.5 mPa.s).

Standards :
- ACEA A3/B4 STANDARDS
- API PERFORMANCE SL
- APPROVALS MERCEDES-BENZ MB-Approval 229.5
- VOLVO VCC 95200356
- PERFORMANCE VW 502 00 505 00

Properties :

Viscosity grade SAE J 300 0W-30
Density at 20°C ASTM D1298 0.841
Viscosity at 40°C (104°F) ASTM D445 67.3 mm²/s
Viscosity at 100°C (212°F) ASTM D445 12.0 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.5 mPa.s
Viscosity index ASTM D2270 175.0
Pour point ASTM D97 -51.0 °C / -60.0 °F
Sulphated ash ASTM D874 1.10 % mass
TBN ASTM D2896 10.1 mg KOH/g
Flash point ASTM D92 224.0 °C / 435.0 °F