MOTUL
8100 POWER 5W40 5L engine oil
In stock
Shipping within 24h
Free shipping ** Free EXPRESS home delivery only in mainland France and Corsica*
- to discover
-
new
-
new
-
new
-
new
-
new
-
new
-
new
-
new
MOTUL 8100 POWER 5W40 5L engine oil
The new 8100 POWER range features ESTER technology: a 100% synthetic formula derived from racing and based on Ester, ensuring exceptional resistance of the oil film at very high temperatures for maximum engine power and torque, as well as protection against wear. Stable oil pressure in all operating conditions, whether road or racing.
Turbocharged gasoline engines with direct injection have a certain risk of sporadic pre-ignition phenomena in the combustion chambers.
This type of abnormal combustion is similar to a sporadic metallic noise from the combustion chambers and is sometimes associated with a short loss of power.
This phenomenon, called LSPI for Low Speed Pre-Ignition, or also Rumble, generates very high pressure peaks in the combustion chamber that can lead to piston destruction and ultimately engine failure.
For the latest generation of petrol engines, i.e. downsized, equipped with direct injection systems and turbochargers, API has developed the API SP standard for engine lubricants in order to guarantee the perfect integrity of these petrol engines in the face of the risk of these abnormal combustions.
MOTUL 8100 POWER 5W-40 is particularly resistant to high temperatures to allow a reduction in wear thanks to its excellent lubricating properties and better control of oil consumption.
Its optimised 5W-40 viscosity grade allows excellent oil circulation and provides the best compromise between power and reliability for your engine.
Suitable for all types of fuel: petrol, leaded or unleaded, Ethanol E85, LPG, Diesel and biofuels.
Standards: API PERFORMANCE SP
Properties :
Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0.845
Viscosity at 40°C (104°F) ASTM D445 87.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.7 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.9 mPa.s
Viscosity Index ASTM D2270 177
Pour point ASTM D97 -48°C / -54°F
Flash point ASTM D92 236°C / 457°F
Sulphated ash ASTM D874 0.79% mass
TBN ASTM D2896 7.9 mg KOH/g
The new 8100 POWER range features ESTER technology: a 100% synthetic formula derived from racing and based on Ester, ensuring exceptional resistance of the oil film at very high temperatures for maximum engine power and torque, as well as protection against wear. Stable oil pressure in all operating conditions, whether road or racing.
Turbocharged gasoline engines with direct injection have a certain risk of sporadic pre-ignition phenomena in the combustion chambers.
This type of abnormal combustion is similar to a sporadic metallic noise from the combustion chambers and is sometimes associated with a short loss of power.
This phenomenon, called LSPI for Low Speed Pre-Ignition, or also Rumble, generates very high pressure peaks in the combustion chamber that can lead to piston destruction and ultimately engine failure.
For the latest generation of petrol engines, i.e. downsized, equipped with direct injection systems and turbochargers, API has developed the API SP standard for engine lubricants in order to guarantee the perfect integrity of these petrol engines in the face of the risk of these abnormal combustions.
MOTUL 8100 POWER 5W-40 is particularly resistant to high temperatures to allow a reduction in wear thanks to its excellent lubricating properties and better control of oil consumption.
Its optimised 5W-40 viscosity grade allows excellent oil circulation and provides the best compromise between power and reliability for your engine.
Suitable for all types of fuel: petrol, leaded or unleaded, Ethanol E85, LPG, Diesel and biofuels.
Standards: API PERFORMANCE SP
Properties :
Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0.845
Viscosity at 40°C (104°F) ASTM D445 87.1 mm²/s
Viscosity at 100°C (212°F) ASTM D445 14.7 mm²/s
HTHS viscosity at 150°C (302°F) ASTM D4741 3.9 mPa.s
Viscosity Index ASTM D2270 177
Pour point ASTM D97 -48°C / -54°F
Flash point ASTM D92 236°C / 457°F
Sulphated ash ASTM D874 0.79% mass
TBN ASTM D2896 7.9 mg KOH/g
Ref.: 111809
See all the Oils MOTULSee all MOTUL products| Universe | Competition, Rallye, Track days |
|---|---|
| Viscosity | 5W40 |
| Color | Not specified |
| Oreca Reference | 111809 |
| Manufacturer's reference | 111809 |
| Brand | MOTUL |
