AP RACING
CP8400 Cerametallic Drive Plate 4 friction pads 184 mm 7.11 24 mm 10 teeth
- Similar products
-
In stockIn stockIn stockIn stock
AP RACING CP8400 Cerametallic Drive Plate 4 friction pads 184 mm 7.11
Why opt for an AP Racing clutch?
You will select your clutch according to use, engine power and torque.
When fitting a racing clutch, you will usually need to modify the engine flywheel.
AP Racing 184 mm diameter clutches have been designed for competition.
Diameter: 184 mm
Thickness: 7.11 mm
Different exterior diameters of the end gear pin available (measured in inches or mm on a non-worn area):
- 0.875", 10 teeth - 1", 10 teeth - 1.125", 10 teeth - 29 mm, 10 teeth - 21.1 mm, 18 teeth - 0.875", 20 teeth - 24 mm, 21 teeth - 1", 23 teeth - 0.8", 24 teeth - 1", 23 teeth - 1.16", 26 teeth - 31.75 mm 10 teeth - 20 mm, 17 teeth - 25.5 mm, 24 teeth - 14.4 mm, 25 teeth
Why opt for an AP Racing clutch?
You will select your clutch according to use, engine power and torque.
When fitting a racing clutch, you will usually need to modify the engine flywheel.
AP Racing 184 mm diameter clutches have been designed for competition.
Diameter: 184 mm
Thickness: 7.11 mm
Different exterior diameters of the end gear pin available (measured in inches or mm on a non-worn area):
- 0.875", 10 teeth - 1", 10 teeth - 1.125", 10 teeth - 29 mm, 10 teeth - 21.1 mm, 18 teeth - 0.875", 20 teeth - 24 mm, 21 teeth - 1", 23 teeth - 0.8", 24 teeth - 1", 23 teeth - 1.16", 26 teeth - 31.75 mm 10 teeth - 20 mm, 17 teeth - 25.5 mm, 24 teeth - 14.4 mm, 25 teeth
Ref.: CP8400A030
See all the Clutch Discs AP RACINGSee all AP RACING productsUniverse | Competition |
---|---|
Oreca Reference | CP8400 |
Manufacturer's reference | CP8400-A030 |
Brand | AP RACING |